A complete line of laser markers enables direct part marking to help manufacturers trace every product from early production steps to the assembly of the final products and beyond. The Open-Air Machine is used in automated production cells serviced by an industrial robot. The robot holds the part in front of the machine during the marking operation. When the marking is complete, the robot can resume the production cycle. The Rotary Table Machine (RTM) is a solution for automated laser marking of parts. Its feeding system allows the marking to be accomplished in hidden time. As the marking of a part starts inside the laser safety enclosure, a part that was previously marked is unloaded and brought by a robotic arm to the following station. The robot can then load the RTM with a fresh part to be marked.